Common laying methods for carpets

　　Regardless of the carpet laying method used, Yuanming carpets require a smooth and clean surface after laying, without any looseness, bulging, wrinkling, or warping

　　The joints should be firm, tight, without any deviation from the joint, obvious joints, and no fluff. The color and luster should be consistent, and there should be no staggered patterns or grids

　　The entrance and other closed areas should be straight and tightly sealed, with a tight edge under the skirting board and a smooth seal. Carpet paving has quality issues and should be reworked and re laid.

　　Common quality problems and solutions for carpet paving

　　Common quality defects in carpet paving include bulging, wrinkling, inconsistent color, and loose carpets

　　(1) Drumming and wrinkling: Except for carpets that are not laid flat before installation, the main reasons are uneven tension and looseness of the supports during installation, as well as individual burrs in the backboard not being caught. If there is a bulging phenomenon when the carpet is opened, it should be rolled up in reverse and spread out smoothly. When paving, the support should be evenly applied. After leveling, immediately install the barbed board and tap it with a flat shovel to ensure that all barbed boards can grip the carpet.

　　(2) Inconsistent color: The reasons include not only poor material quality, but also moisture or water seepage on the surface of the base layer that causes the carpet to absorb water and change color, as well as sunlight exposure that causes some parts of the carpet surface to naturally lighten. Pay attention to selecting carpets with good quality and consistent colors when purchasing. Avoid carpet getting wet during use. Do not lay carpets on floors that are prone to getting wet. Direct sunlight or construction in hazardous gas environments should be avoided, and direct sunlight should also be avoided in daily use.